Top 10 typical forklift mishaps ， forklift procedure must focus on these matters ！.

Do not underestimate the forklift at the workplace. If the procedure is not good, there will be significant accidents in mins, and there are many accidents including forklifts.

Instance 1: The forklift cargo obstructed the vehicle driver's view, and the individual ahead can not be discovered, causing a moving accident.
Case 2: In order to maintain the equilibrium of the forklift when lifting heavy goods, the employees used their body weight as the weight, which practically triggered casualties.
Instance 3: The size of the forklift cargo surpasses the permitted size of the course and hangs on the roadside shelf, which almost causes an crash.
Situation 4: Forklift is speeding and surrender throughout a turn.
Case 5: The forklift chauffeur did not see the pedestrian, and the pedestrian did not see the forklift.
Case 6: The forklift raises the personnel unlawfully, the forklift driver does not put on the seat belt, the forklift lifter drops and the motorist is crushed when the forklift rolls over.
Instance 7: The forklift vehicle driver did not put on a safety belt and fell from the automobile when it rolled over and was crushed.
Forklift procedure must take notice of these issues ：.

Begin.
1. Prior to beginning, observe the surroundings, and after confirming that there are no challenges that prevent the security of driving, honk the horn initially and after that start.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale must be safe before starting.
3. When the forklift begins with a tons, the driver needs to first verify that the lots is stable and reputable.
4. The start has to be sluggish and steady.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the pole ought to be slanted backwards. .
2. Do not raise the fork too high when driving. When going into and leaving the task site or while driving, take care that there will be no barriers in the sky. When the lots is taking a trip, the fork has to not be elevated expensive, which will certainly impact the stability of the forklift. .
3. After discharging, the fork ought to be reduced to the typical driving position prior to driving. .
4. When transforming, if there are pedestrians or cars nearby, the driving signal ought to be issued initially. High-speed sharp turns are forbidden. High-speed doglegs will trigger the car to shed side security and tip over. .
5. When the forklift is downhill, it is purely restricted to switch off the fire and slide, and it is prohibited to brake instantly while driving with lots unless there are unique situations.
6. When the forklift is running, it must comply with the traffic rules in the manufacturing facility and should keep a specific safety and security distance from the car ahead. .
7. When the forklift is running, the lots has to be in the lowest setting that does not impede the driving, and the gantry must be appropriately slanted back. The lots will not be increased other than when stacking or packing. .
8. The height of the load must not block the driver's sight. In unique conditions, when the thing influences the forward vision, drive at a reduced rate when turning around.
9. It is prohibited to turn on the ramp, nor to drive across the ramp. .
10. The risk-free driving rate of the forklift in the manufacturing facility location is 5 km/h, and it should drive securely at a low speed when getting in the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for workers to base on the fork to hold things and play a stabilizing role. .
12. If issues are found, they will certainly be fixed and reported in a prompt fashion, and they will certainly never ever operate with illnesses or hide them.

packing and discharging.
1. When fork-loading items, the range between the two forks must be changed as needed to make the lots of the two forks well balanced and not skewed, and one side of the item need to be against the shelf. .
2. It is prohibited to work with a solitary fork or utilize a fork top or draw. In special circumstances, safety and security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of filling and discharging items, the forklift needs to be braked with the brake. .
4. The rate of the vehicle must be slow and consistent. Beware not to roll the wheels on the dunnage, so as not to extend the rolled items and hurt people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the load, and it must be noted that the fork idea should not touch other goods or items. The lots must be maintained with minimal back tilt of the gantry to ensure that the lots does not slide in reverse. The pole can be tilted ahead somewhat when the lots is lowered to allow for easy positioning of the load and removal of the forks. .
6. It is restricted to fork items at broadband and hit hard items with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to stand Electric Forklift Truck for Warehouse around the fork, so as to stay clear of the collapse of the goods and hurt individuals. .
8. Overwhelming is forbidden, and it is forbidden to make use of forks to raise employees to participate in high-altitude operations to stay clear of high-altitude falling mishaps. .
9. It is not enabled to use the brake inertia to slide, put, round or roll items. .
10. It is not allowed to make use of forks to pick, turn pallet dump.

Leaving .
1. It is prohibited to leave the forklift when the items on the fork impend. Prior to leaving the forklift, you need to discharge the goods or reduced the fork framework.
2. Draw the emergency brake manage to dead or depress the parking brake button.
3. The engine is shut off and the power is removed. (Except for Electric Forklift Truck for Warehouse special circumstances, such as the vehicle driver does not leave the lorry's view and does not exceed 1 min).
4. Remove the trick. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the look must be inspected, and gas, lubing oil and cooling water should be added.
2. Examine the safety and security efficiency of beginning, running and braking.
3. Inspect whether the lights and horn signals are full and efficient.
4. Throughout the operation of the forklift, inspect whether the stress and temperature level are normal.
5. After the forklift is running, the exterior leakage needs to likewise be examined and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You need to examine before leaving the automobile;.
2. When you run into someone before you throughout driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The turning need to not be also sharp to stop the propensity of " complimentary switching";.
6. Running up and down the slope should be slow and consistent, and no turning on the incline is allowed.
7. Do not drive across the slope. When the gradient is more than 10%, the vehicle ought to be driven in reverse when worsening;.
8. When the forklift personnel bring the goods and move forward, if they run into big or heavy items and go to the motorist's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" must be followed in the procedure.
1. Single fork procedure is not permitted.
2. It is not allowed to raise the goods for far away driving.
3. It is not allowed to pick up the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not permitted to utilize stopping force to expatriation round or easy-to-roll things.
7. It is not enabled to bring people to deal with the pallet or fork, and it is purely prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Car park is not allowed under the following conditions.
1. Curves, narrow roads, train crossings;.
2. Areas with a longitudinal slope greater than 5%.
3. When there is an barrier on one side of the road, the contrary side of the section with the very same length as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844